DUAL BONDED FOR A SOFTER TOUCH

A newly developed method in football production is ready to be presented: Dual Bonded is the name - DB in short. Two editions of the new production method is available in our football range this year.



BLAZE DB.

The construction of this ball consist of a PU-material laminated with 3 mm foam. Next, two layers of textile underlining are laminated to the foam layer to add stability. The panels are then printed with 3 mm edge glue and stitched by hand. In the heat mold the glue is activated to hide the stitches. Next, the seam sealing is done by hand. The glue in the seams reduces the water uptake significantly The bladder inside is a SR bladder with excellent air retention. The result is a football with both stability, control and a softer touch compared to other balls in the range.

Read more about Blaze DB

TARGET DB

A new football, which is both machine stitched and sealed with glue. The construction consists of a PU-material laminated with 3,5 mm foam. Two layers of textile underlining are then laminated to the foam layers to add stability. Finally, the panels are sealed with 3 mm edge glue and stitched together. The glue is activated in the heat mold to hide the stitches and the seam sealing is done by hand. By using glue in the sealing of the seams, the water uptake is reduced significantly.

read more about Target DB



animated DUAL BONDED FOOTBALL - BLAZE DB

The football consists of six crucial elements: Bladder, lining, foam, surface, valve and bonding.​

  • Restart

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • Restart

  • 1

    SR Bladder

  • 2

    Lining

  • 3

    Foam

  • 4

    PU Surface

  • 5

    Double Lock Valve

  • 6

    Dual Bonding

Choose a point above to get more info.

SR Bladder

The bladder in this ball is a reinforced SR-bladder with excellent airtightness for increased stability and controlled bounce.

Lining

Two layers of textile underlining are laminated to the foam layer to add stability.

Foam

The underlying foam is made of a 3 mm thick and exclusive material that gives the ball a softer, lighter and more comfortable touch.

PU Surface

The outer layer of the ball is made of synthetic leather in polyurethane (PU). The surface of this material consists of lots of PU fibres, which give the football a strong surface with consistent softness.

Double Lock Valve

The rubber material used in our valves is well known for being airtight and together with the Double Lock system, where the air must pass through two ”gates” to escape, the ball is even more airtight than the requirements demanded by FIFA.

Dual Bonding

The panels are printed with 3 mm edge glue and stitched by hand. In the heat mold, the glue is activated to hide the stitches. The seam sealing is done by hand, and the glue in the seams reduces the water uptake significantly.
^